Home / All / News /

Optical brightener

Contact Person
Hughes
Name:
Hughes
Tel:

86-0571-82775476

Email:
Address:
6th Floor,Block 4,Orient International Plaza,No.60 North Shixin Road,Xiaoshan, Hangzhou,China

Optical brightener

Mar 5,2009
  The most common classes of chemicals with this property are the stilbenes and older, non-commercial fluorescent dyes such as umbelliferone, which absorb energy in the UV portion of the spectrum and re-emit it in the blue portion of the visible spectrum. A white surface treated with an optical brightener can emit more visible light than that which shines on it, making it appear brighter. The blue light emitted by the brightener hides yellow and brown tones, making treated materials appear whiter.
  There are approximately 400 brightener types listed in the Color Index, but less than 90 are actually produced commercially and only a handful are commercially important. Generically, the C.I. FBA number can be assigned to a specific molecule, however, some are duplicated, since manufacturers apply for the index number when they produce it. The global OBA production for paper, textiles and detergents is dominated by just a few di- and tetra-sulfonated triazole-stilbenes and a di-sulfonated stilbene-biphenyl. These are subject to fading when exposed long term to UV, due to the formation of optically inactive stilbene cis-isomers found at the center of the molecule. All brighteners have extended conjungation and/or aromaticity, allowing for electron movement. Some non-stilbene brighteners are used in more permanent applications such as whitening synthetic fiber.
  Basic class types of brighteners include:
  Triazine-stilbenes (di-, tetra- or hexa-sulfonated)
  Coumarins
  Imidazolines
  Diazoles
  Triazoles
  Benzoxazolines
  Biphenyl-stilbenes
  Brighteners can be "boosted" by the addition of certain polyols like high molecular weight polyethylene glycol or polyvinyl alcohol. These additives increase the visible blue light emissions significantly. Brighteners can also be "quenched". Too much use of brightener will often cause a greening effect as emissions start to show above the blue region in the visible spectrum. Besides the formation of cis isomer in stilbene-containing brighteners (only the trans isomer is optically active), continued exposure to UV-containing light will actually cleave the molecule and start the process of degradation.